03 · Signature finish
Microcement
A seamless, contemporary surface with no grout lines and no interruptions, for minimalist interiors that let the architecture speak.
The finish
One Continuous Surface
Microcement is applied by trowel in thin layers to create a single, continuous skin across walls and, depending on the approved system, floors, vanities and showers. The result is calm and architectural, with a subtle hand-made variation that sets it apart from poured concrete or large-format tile.
Because performance depends on the product system and the surface beneath it, every microcement project starts with a site assessment and a clear specification.
Applications
Where It Can Go
Final suitability depends on the approved product system and installation specification for each area.
i.
Feature Walls & Fireplaces
Clean, mineral texture for fireplaces, living spaces, entries and commercial interiors, with no seams or joints.
ii.
Bathrooms & Wet Areas
Walk-in showers, vanity walls and wet rooms, using a system with the specified waterproofing and sealers.
iii.
Cabinetry, Floors & Details
Seamless cabinetry tops, built-ins, vanities, counters, floors and stairs, where the system is rated for that use.
Appearance
Soft Concrete, Refined
Microcement can be finished from a gently clouded matte to a smoother, satin surface. Tones range from chalky whites and warm greiges to deep mineral charcoals.
Bone
Indicative
Greige
Indicative
Cement
Indicative
Charcoal
Indicative
Installation considerations
Getting It Right Underneath
Microcement is only as good as what it’s applied to. Here’s what we look at before we specify a system.
Substrate & stability
The surface beneath must be sound, stable and properly prepared. Cracks, movement, loose tile or deflection in floors are assessed and addressed before any coating is applied.
Moisture & waterproofing
Showers and wet areas require the manufacturer’s specified waterproofing membrane and sealers. Floors over concrete are checked for moisture before work begins.
Curing & timing
Microcement is built in several layers, each with its own drying time, followed by sealing and curing. We’ll plan the schedule with you and your other trades so the space is protected while it cures.
Care & maintenance
Clean with pH-neutral products and avoid abrasive chemicals. High-traffic surfaces may need the protective sealer refreshed over time. You’ll receive care guidance specific to the installed system.
Samples & pricing
Start With a Sample
Tell us which product and colour you’re interested in, and share any texture or inspiration photo you’d like us to recreate. We’ll make a 2 ft × 2 ft sample so you can see the finish in person, then make any changes needed before work begins.
Microcement starts at
$1,250
Sample size
2 ft × 2 ft
Sample turnaround
Usually 3–4 days
Final pricing depends on the size and scope of your project.
Questions
Microcement FAQ
What is microcement?
Microcement is a thin, decorative cementitious coating, typically just a few millimetres thick, applied by trowel in several layers and then sealed. It creates a continuous, seamless surface with no grout lines, and a soft, refined concrete-like character.
Can microcement be used in showers and bathrooms?
Many microcement systems are designed for wet areas when installed with the manufacturer’s specified waterproofing and sealers. Suitability always depends on the specific product system and the substrate, so we confirm this for each project before recommending it.
Can it go over existing tile or floors?
In some cases, yes. Microcement can often be applied over stable, well-bonded existing surfaces with the right preparation. Movement, moisture and the condition of the substrate all matter, so we assess every surface on site first.
How durable is microcement?
Properly installed and sealed, microcement is a hard-wearing finish. Durability depends on the product system, the sealer and the use of the space. Floors and counters need systems and sealers rated for that use.
How do I maintain it?
Regular cleaning with a pH-neutral cleaner and a soft mop or cloth is usually all that’s needed. Avoid harsh or abrasive chemicals. Depending on traffic, the protective sealer may need periodic renewal, and we’ll leave you system-specific care instructions.
How much does microcement cost?
Microcement projects start at $1,250. Final pricing depends on the size and scope of your project, and we make a 2 ft × 2 ft sample first so you can see the colour and texture before you commit.
Begin a conversation
Let’s Create
Something Lasting
Tell us about the space, the light and the feeling you’re after. We’ll come back with ideas, finish recommendations and next steps. No pressure, no generic quote.
Prefer to share drawings or inspiration images? Use the full project inquiry.